Solar Charge Controller Hybrid SolarCon 16A 12V by Sukam

Rs.4,000.00

Solar Charge Controller Hybrid SolarCon 16A 12V by Sukam

  • SolarCon Solar Charge Controller can be connected with any existing UPS/Inverter and convert it into a solar powered system.
  • Graphic dot-matrix LCD screen & HMI (human-machine-interface) with 4 buttons, integrated menu display & operation.
  • Full control parameters setting and modification, diversified load control mode.
  • Gel, sealed and flooded battery type options – SMF/TT/LA batteries.
  • Reverse protection : any combination of solar module and battery.
  • To buy – Please fill Product Enquiry form.

To Buy - Please fill Product Enquiry form

Product Enquiry Contact Us for Bulk Order.
Compare
Sold By : Su-Kam
SKU: HISIS-12V Category:

Description

This Solar Charge Controller Hybrid SolarCon 16A 12V Solarcon is a smart device, based on patented technology, which can convert any ordinary inverter and battery setup into solar power system. Solar Charge Controller Hybrid SolarCon 16A 12V by Sukam lets you use the free and green energy generated by solar panels to power all your electrical equipment. You make huge savings on electricity bill and get to charge the batteries even during powercut and of course help save the environment. Brand=”Su-kam”  Manufacture=”Su-kam Power Systems Limited”  Model=”HISIS-12V”  
Model No. HISIS-12V
Brand SuKam
Warranty 2 Years
In the box Solar Controller, User Manual
Charge Controller Type PWM, Hybrid Controller
Battery Voltage 12V DC
 

Solar Charge Controller Hybrid SolarCon 16A 12V by Sukam

  Su-Kam’s SolarCon hybrid solar charge Controller is an intelligent device with inbuilt intelligent technology for utilization of solar power optimally.   Working Principle SolarCon hybrid solar charge controller solution overcomes the challenges in the existing solutions. It can be connected with any existing UPS/Inverter and convert it into a solar powered system. It controls the mains supply to the inverter so that when the battery is fully charged and still solar power is available to charge the battery, it automatically disconnects the mains from the inverter and the inverter starts working in backup mode now the power is supplied from battery and solar. This helps in utilizing the solar power generated optimally. When the battery is discharged below the pre-defined user settable limit and mains is present, it is connected to the inverter so that the load is bypassed to mains and the battery charging can take place.   Features
  • – High efficient Series PWM charging, increases battery life and improves the solar systems performance
  • – Widely used, automatically recognizes day/night
  • – Graphic dot-matrix LCD screen & HMI (human-machine-interface) with 4 buttons, integrated menu display & operation
  • – Humanized design of browser interface, for convenience of operation
  • – Full control parameters setting and modification, diversified load control mode
  • – Gel, sealed and flooded battery type options – SMF/TT/LA batteries
  • – Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life
  • – Reverse protection : any combination of solar module and battery
  Electronic Protection Updates
  • – Short Circuit through Fuse
  • – Reverse Battery Mode with LED indication
  • – Reverse PV array with LED indication
  • – Surges/Spikes protection with MOV
  • – No mechanical switch, uses MOSFET as an electronic switch
  • – Prevent overheating, overcharging, over discharging, overload, and short circuit
  Displays (Single Line)
  • – Backup Mode and Mains Mode
  • – Battery Voltage
  • – Solar Status
  • – Rupees Saving
  • – Mains Low & High
  • – Battery Low & High
  Operations/Options
  • – Input Range : 90V – 300V ± 20V
  • – Automatic Changeover Solar/Grid Battery
  • – Short circuit through Fuse
  Applications
  • – Any existing inverter / UPS
  • – New inverter / UPS
  Convenience
  • – Installation with ease
  • – Electricity bill reduction
  • – Compatible with any UPS / Inverter
 
Existing System System to be installed
Existing UPS System Existing Battery PV Panel Solar Con
250 VA 50 Ah TT 80 W/12V 12V/10A
400 VA 100 Ah TT 80 W/12V 12V/10A
450 VA 100 Ah TT 80 W/12V 12V/10A
650 VA 150 Ah TT 80 W/12V 12V/10A
850 VA 150 Ah TT 80 W/12V 12V/10A
850 VA 150 Ah TT 80 W/12V 12V/10A
850 VA 135 Ah TT 100 W/12V 12V/10A
  Load Chart
250 VA 450 VA 650 VA 850 VA
Computer
Television 1 1 1 1
Tube light 1 1 2 3
Fans 1 3 3
CFL 2 5 2 4
   Specification  
Model HISIS-12V
Nominal Battery Voltage 12 V(single Battery)
Recommended Home UPS / Inverter Range Up to 1000VA
Minimum Recommended Battery Ah capacity w.r.t. PV module capacity 135Ah with 260Wp(SPV) / 120Ah with 200Wp / 75Ah with 160Wp / 40Ah with 100Wp
 Maximum PV Panel Rating 36 cell Polycrystalline / mono crystalline
Typical : 250 Wp
Maximum : 260 Wp
Imp ≤ 16A
Maximum PV open circuit voltage 25Voc
Power Conversion Efficiency ≥ 95%
Charging stages Three stage charging algorithm : Bulk, Absorption and Float
Bulk Charge Voltage (TUB / LA) User Selection Switch 14.2 ± 2% (LA) at charger’s operation terminal @ 25°C
14.6 ± 2% (TUB) at charger’s operation  @ 25°C
Absorption period Held battery voltage at bulk voltage level for a cumulative period of 2 hours
Float voltage 13.7 ± 2% at charger’s o/p terminal
Equalization Voltage Bulk voltage + 1V
Automatic Temperature compensation in Provided
Bulk Voltage only (18mV ± 3mV / °C / 12V Battery) (25°C Ref)
Battery low Warning 10.7V ± 2%
Battery Low Warning Recovery 11.0V ± 2%
Battery High Shutdown 16.0V ± 2%
Battery High Shutdown Recovery 14.0V ± 2%
PV High Current (Initially When the systems boots if it detects high current from PV. It will go to PV high current shutdown) 21A + 2A
Auto Restart after PV High Current 3.5 min ± 2A
PV high voltage shutdown / recovery 30V / 25V ±5%
Rupees saving reset Provided through keypad
GRID PARAMETERS
Input Range 90V – 300V ± 20V
Automatic Changeover Solar / Grid / Battery Grid power connects to inverter when battery voltage ≤ 11.4 / 11.8 / 12.2 / 13.0V ± 2% per battery (as per setting of selection switch) if grid is within the specified range
PROTECTIONS
Short Circuit (Mains Mode) Yes (through Fuse)
reverse Battery Yes with LED indication
Reverse PV array Yes with LED indication
Surge / spike protection Yes through MOV
LCD DISPLAY MESSAGES
Backup Mode & Mains Mode Battery Voltage / Solar status / Rupees saving /
Mains Low / Mains High / Battery Low / battery High
  General  
Service type use Indoor
Operating Temperature Range 0 to 55°C
Humidity Up to 95% RH(NC)
Storage Temp 0 to 40°C
Cooling Natural
Dimensions (W x D x H) in mm 215  x 156 x 68 mm
Weight (± 100g) 1.3 Kg
Enclosure MS Sheet metal

Additional information

Weight 2 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.