Description
Solar Charge Controller 12V/6Amp (Metal Body) by Hygrid Solar
Solar Charge Controller 12V/6Amp (Metal Body). Hygrid Solar Charge controller uses PWM charging Technology, so that as the battery reaches full charge, the PWM pulses slower, gradually tapering off the charge. In Hygrid Solar Charge controller Pulsing is good for the batteries since it gently mixes the electrolyte, preventing stratification and sulphation. Low voltage disconnect protects the batteries from severe discharge by shutting off loads before the battery voltage drops to damaging levels.
Brand=”Hygrid Solar” Manufacture=”Hygrid Solar” Model=”Hysol-6″ Price=”580.00″
| Parameter | Hysol-6 | Hysol-10 |
|
General
|
||
| Application | Solar electrification | |
| Use | Battery Charging and load control | |
| Operating temperature | -10°C to 50°C | |
| Storage temperature | -25°C to 85°C | |
| Chargingr type | Two step series PWM | |
| Indications | Charging, Low Battery, Overload protetcion | |
| Special Features | Reset Button | |
| Mobile Charging | 5 pin mobile charging | |
|
Electrical
|
||
| Nominal system voltage | 12 V | |
| Charging current | 6 A | 10 A |
| Max SPV Size | 90 W | 150 W |
| Charge Controller efficiency | >95% | |
| Idle consumption | <6 mA | |
| Protection | Against module reverse current flow, reverse battery and overload | |
|
Mechanical
|
||
| Fixing | Wall mounting with screws | |
| Case | Metallic Body | |
| Size (Shipping)(mm) | 100 x 90 x 50 | |
| Weight (Shipping) | 600 gm | |
Reviews
There are no reviews yet.